Sample receivers

JISKOOT PR sample receivers
The PR-23, 53 and 103 are 9, 18 and 35 litre (2.5,5 and 10 USG) portable sample receivers designed for the collection of crude oil and refined product batch samples. They have no dead volume and include a pressure gauge, relief valve and a facility for a customs seal. The PR range has integral mixing pipe-work and keyed connectors for use with an MS-53 laboratory mixer to ensure the homogeneity of analysis samples....read more

CLIF MOCK True Cut Receivers
CLIF MOCK™ True Cut R-Series Portable Sample Receivers are designed to meet or exceed all API, ISO and ASTM industry standards and are available in 1, 2, and 5 gallon sizes. ...read more

CLIF MOCK CMC Circulating System
CLIF MOCK™ True Cut Circulating Systems allow operators to collect, store, and mix crude oil and other low-pressure sampled product in a single receiver, minimizing the loss of light ends....read more

CLIF MOCK Multiple Receiver Circulating Systems
The requirement for multiple crude oil receivers on pipelines has become common practice in recent years. This has been due to either more frequent or smaller batch sizes as well as the increased accuracy of having dedicated product or customer receivers. ...read more

JISKOOT Constant pressure sample receivers
The CPC is a compact, portable constant pressure sample receiver for the receipt, storage and transportation of liquid and gaseous hydrocarbon samples. It is designed to be pre-charged with inert gas to maintain the sample at process pressure for analysis. The CPC can be supplied with external volume indicators, magnetic sensors and internal mixing balls....read more

JISKOOT ShearMix Sample Receiver Mixing Station
The Jiskoot ShearMix station is designed to fully homogenise the contents of a constant pressure sample receiver, at the sample collection line pressure to ensure analysis sub-sample homogeneity andretention of ‘light-ends’. ...read more

JISKOOT Sample receiver weighing system
The CanWeigh is an intrinsically safe electronic weighing system designed to measure the mass of samples collected in up to two sample receivers. This measured mass is compared with the expected mass of sample by the control system during the batch and can be used to provide the performance factor measurements required by the sampling standards....read more

JISKOOT MS53 Laboratory mixer
In a sample receiver the heavier components, such as water, separate. To ensure that the sample withdrawn for analysis is representative the contents must be thoroughly mixed. A MS-53 is connected to a sample receiver and samples may be drawn from a takeoff valve or through an optional septum. The MS-53 mixer can also be supplied in a heated enclosure for temperature critical oils....read more

JISKOOT CPC volume sensor
The CPC Volume Sensor is a non-invasive sensor allowing a sampler controller, such as a Jiskoot InSpec controller, to continuously monitor the filling of a constant pressure sample receiver (CPC). This fulfils the requirements of the ISO 3171, ASTM D 4177, API 8.2 and IP 6.2 sampling standards....read more